Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, February 19, 2012

Kick Panel Rig: EXPOSED!

There it is, sans kick panel. You can see the breadboard (a real one!) on which it is built. The box in the center has the oscillator circuitry (currently on 75 meters, but subject to change); the box is elevated a few inches by two pieces of wood -- I do this so that the frequency control will be a comfortable distance from the table! HB-ergonomics! The AF (mic) amp is in the lower left (just a 741 op amp). You can see the adjustment pot of the balanced modulator behind the mic amp. The low pass filter of the PA is visible on the right (rest easy Steve Smith!). The switch on the right is T/R. The red switch is "spot" (or in the UK "net").

I thought I was having some trouble with RF getting into the mic amp. The audio out from the mic amp looks a bit distored when I have the oscillator and PA circuits fired up. I worked on it for a while, beefing up the decoupling on the 12 volt lines, but that didn't change things. I've decided not to worry about it, because the output signal from the final looks clean, and the signal sounds good on my trusty Drake 2-B. It may have been a test gear problem -- the 'scope probe may have been picking up some RF and may have been uglying up the AF wave form.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

1 comment:

  1. Ah, yes, the much-maligned 741. It may not be the quietest or fastest op-amp but, like the lowly cucaracha, long after "the big one", the 741 will still be around in the millions along with the 2N2222. It is my favorite because it is almost free and almost indestructible.

    Hey! In the dining area this morning a CFL died spectacularly. It flickered a couple times, then went dark with a low but ugly sounding "zzzzorrch, pop!" noise. We're all familiar with the acrid aroma of fried electronics that hung in the air. So, later in the day I dissected it with a ball-peen hammer and a wood chissel. :-)

    73.......Steve Smith WB6TNL
    "Snort Rosin" and other fumes.

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column