No birds do sing
-
Hi FastRadioBurst 23 here letting you know of our forthcoming shows this
week. On Sunday 21st April 2024 at 0900/1300 hrs UTC on 6160 kHz and then
at 2000 ...
1 hour ago
Serving the worldwide community of radio-electronic homebrewers. Providing blog support to the SolderSmoke podcast: http://soldersmoke.com
Solar X-rays: Geomagnetic Field: |
hi, pete, and juliano
ReplyDeletei would love to add aerial analyzer like one designed by VK5JST in the list of test gear
nice treatment of soldersmoke #174
regards
sarma from India
Bummer of the Bitx40.
ReplyDeleteA good IF is 8.192mhz with a 15.360Mhz LO can be done using crystal for LO (Use two in super VXO).
Order of equipment obtainium...
Decent soldering iron/station
Good multimeter (ohms, Volts, amps).
AADE LCII parts is not parts.. measure them.
Frequency counter simple is good, to 50mhz atleast
Scope, a good one. Rigol adds a lot to capability.
Oh a spec analyser is just that if you add a tracking generator now you can do SNA(scalar network analyser).
However... The one device I use is dirt simple.
A 50 uA meter, two diodes in voltage doubler and two caps.
Whatsitdo, RF detector. The diodes are right on the back
of the meter. One cap is across the meter and the other is from the diodes as a "probe". If the meter can be moved there is RF, if an amp with no input moves the meter its oscillating, if the oscillator doesn't move the meter its defunct. It was my first RF measuring tool some 50 years ago and I still use it.
Allison
Sinc L/C = VFO and Crystal = VXO..
ReplyDeletehow about DDS chip = DXO?
Bill & Pete,
ReplyDeleteI am a longtime listener and look forward to your podcast each month! I had to comment on Pete's crystal radio project. When I was six or seven in the fifties, my dad and I built a crystal radio and had the same issue... not enough gain. Dad suggested we build a transistor amplifier. As you told the story, somehow I knew that you too would say you used a beautiful metallic purple-blue Rayteon CK722! My amp was in a clear plastic box and I loved showing my friends the cool, magic "transistor". Now, back to my K2, KX3, Raspberry Pi and Arduino!
73, Mike, W8NWA (My dad's first call from the 30s)