Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Harper -- Rex. Show all posts
Showing posts with label Harper -- Rex. Show all posts

Friday, November 10, 2023

SolderSmoke Podcast #249 -- Travel, Pete's 6BA6 rig, Books!, VFOs, SDR, Computers, Spectrum Analysers, Transistor Man! MAILBAG

New VFO for 15-10 Transceiver
Schematic below

SolderSmoke Podcast #249 is available:  http://soldersmoke.com/soldersmoke249.mp3

There is also a video version of this podcast: https://youtu.be/5xyaYivtOhw

Travelogue:  

HAPPY VETERANS' DAY TO PETE AND GRAYSON AND TO ALL THE OTHER VETERANS WHO ARE LISTENING. 

Trip out to San Francisco. Sticker placed on the corner of Haight and Ashbury:  See picture below.  Note other sticker.  Really Groovy! 

Bill's DXCC-100.  DONE.   

Tribal Wisdom:  W1REX on HRWB https://soldersmoke.blogspot.com/2023/11/listen-to-rex-w1rex-lots-of-tribal.html

Pete's Bench:

Pete's 6BA6 rig

Pete's 6BA6 Rig

Pete Re-invents the Shirt-pocket SSB Rig

Pete's remake of the ShirtSleeve Transceiver

Pete Builds Two Computers 

Pete Adds a Second Band to his Homebrew SDR 
 

SHAMELESS COMMERCE DIVISION:  

BEZOS BUCKS ARE BACK!  PLEASE  BUY THERE! >>>>>>>>>>>>>>>>>>>>>>>

Mostly DIY RF:  Work proceeds in the Oregon Silicon Forest on P3ST kit development. Todd is confident the P3ST will be released on December 18th.Many other kits available now:  https://mostlydiyrf.com/ 

Sign up for the newsletter:  https://mostlydiyrf.com/subscribe/ 




Bill's Bench: 

Rebuild of the 15-10 VFO (for improved Dial Spread) (with yet another QF-1 capacitor) https://soldersmoke.blogspot.com/2023/10/dial-scale-linearity-spreading-out.html

Why Building for 10 meters is harder: https://soldersmoke.blogspot.com/2023/09/why-building-for-10-meters-is-harder.html

Copper Tape shielding of 15-10 rig. 

Crushing Spurs with Better Bandpass Filters (see blog post) https://soldersmoke.blogspot.com/2023/09/crushing-17-and-12-meter-spurs-with.html

Another 15-10 rig in the works... for SSSS.   Boards are accumulating... 

More problems discovered with the Herring Aid 5 Receiver . Lots of SS blog posts  Comment from Rick WD5L.  ) https://soldersmoke.blogspot.com/2023/10/a-big-error-discovered-in-1976-qst.html   Did you try to build one?  Did you succeed or did you fail?  Please let us know. 

The Basil Mahon books (blog posts) https://soldersmoke.blogspot.com/2023/11/basil-mahon-is-author-for-us-he.html

The Sunburst and Luminary book of Don Eyles (blog posts) 

The Art of Electronics by Horowitz and Hill (blog posts) 

Spectrum Analysers:  Tiny SA Ultra https://soldersmoke.blogspot.com/2023/09/the-tinysa-ultra-spectrum-analyser-video.html  and Polarad 632C-1; George WB5OYP gave me one of these spectrum analysers  (I NEED a manual! Does anyone have a manual or a schematic? )  : 

Polarad 632C-1

Stabilizing the EB63A (with Pete recommended LP filters from e-Bay. 


MAILBAG:

TRANSISTOR MAN T-SHIRTS!  Thanks to Roy WN3F! 

Todd VE7BPO on AF amplifiers.  Thanks Todd.  

Wes W7ZOI -- Always a privilege to exchange e-mail with Wes. 

E-mail from Jay Rusgrove W1VD. About the Herring Aid 5. 

E-mail from Eamon Skelton EI9GQ!  Amazing! 

HB2HB with Denny VU2DGR https://soldersmoke.blogspot.com/2023/09/hb2hb-contact-with-denny-vu2dgr.html

Nick M0NTV on diode matching for ring mixers: https://soldersmoke.blogspot.com/2023/10/does-matching-matter-diode-matching-for.html

Paul Taylor VK3HN on the new Elecraft CW rig. 

Dean KK4DAS fixed the noise in his Hallicrafters SW receiver.  A long battle, finally won. 

Dean also in contact with G3UUR. 

Ramakrishnan VU2JXN helping me set up a backup of blog on WordPress.  

Mark KA9OOI noticed that SS podcast archive appears gone.  In fact just temporarily relocated to http://soldersmoke.com/podcastarchive.html

(SS PODCAST Archive temporarily relocated to http://soldersmoke.com/podcastarchive.html

Andreas DL1AJG - Crystal radio video. https://soldersmoke.blogspot.com/2023/10/building-crystal-set-videos.html

George N2APB on the Herring Aid 5

Grayson KJ7UM experimenting with Varactors and Thermatrons! 

Thomas K4SWL on Mattia's DC receiver. https://soldersmoke.blogspot.com/2023/10/mattia-zamanas-amazing-direct.html

Bob Weaver of Dial Bandspread Linearity  fame.  Electron Bunker

Mike Bryce WB8VGE QRP Hall of famer -- he too couldn't get the Herring Aid 5 working. 

Kirk NT0Z wrote about the Wayback machine.  But this former ARRL staffer he also tried and failed to get the Herring Aid 5 going.  Way back when... https://soldersmoke.blogspot.com/2015/03/kirks-herring-aid-tuna-tin-and-regen.html


New 15-10 VFO with schematic

Dial Bandspread (Before)

At corner of Haight and Ashbury

Thursday, November 2, 2023

Listen to Rex. W1REX. Lots of Tribal Wisdom in this Ham Radio Workbench Interview

 

This week's Ham Radio Workbench podcast features an interview with Homebrew Hero Rex Harper, W1REX of QRPMe fame. (The bulk of Rex's portion starts at about 1:26:30.)

I really liked this talk with Rex.  His enthusiasm for homebrewing is really inspiring -- it is very reassuring to know that there are others like us. Rex clearly has The Knack.  

I got a kick out of Rex's story about the outhouse at Dayton.  FB OM.  

Here is the video of the mojo transfer ceremony in which shared some of the Tuna Tin 2's mojo with my BITX 17.  Thanks again Rex!  


And thanks to George and the gang out at Ham Radio Workbench. 

Saturday, March 25, 2023

Update on the High-School Direct Conversion Receiver Project: Board #4 Completed

One of the receivers. (l to r) AF, PTO, Mixer, BP filter

The students continue to make great progress on their direct conversion receivers.  Yesterday they were enthusiastically sitting down to workbenches, building Manhattan-style circuits, working directly from schematic diagrams.  It was really impressive.  They are building receivers. 

This week we had two sessions of about two hours each. We introduced the final board:  the audio amplifier.  Many of the students began work on this amplifier; others were catching up with work on boards presented earlier. 

The AF amp is their most challenging board:  It used 14 Manhattan pads and about 26 components.  We warned the students that amplifiers often aspire to be oscillators.  We told them to pay attention to layout, and to keep their leads short.  

One of my builds, and a Manhattan board pattern

At first, the students just built the first stage on the AF amp board. They tested this, then moved on to build the other two stages.   

By the end of Friday, two groups had completed the build of the AF amplifier board.  

We think there are about 13 receivers in production.  Some are near completion, others will need more work.  

On Thursday of next week those teams that have completed all four boards will put the circuits together and will test the entire system.  They will then add all needed front and back panels and socketry. 

We really want the students to complete as many of these receivers as possible.  Exam season and the end of the school year is approaching, so we have to get this done.  We will remind students that they don't want to that person who ALMOST finished a project!  We will urge them to GET IT DONE!   They can tweak it and mod it later.  This kind of tweaking and modification is part of the homebrew experience. 

We have been presenting awards to the students who are first to complete each stage:  The winners of the PTO board competition got a copy of SolderSmoke:  Global Adventures in Wireless Electronics.   Those who won the mixer competition got a W1REX Hamfest Buddy transmitter.  Thanks Rex!  And this week we presented an award to the students who were the first to complete their bandpass filter.  You've heard of the Tony, the Emmy and the Grammy?  Well, we presented "The Torry"  (from Toroidal).  The trophy was made from a toroidal winding tool made in Alaska by KL7FLR.  I explained to the students who had made it.  Thanks Paul! 

"The Torry"

Wednesday, March 3, 2021

The SolderSmoke Team Talks to the River City Amateur Radio Communication Society (Video)


Pete and I had a great time speaking to this really nice California ham radio club (video of the event appears above).  Special thanks to club president Dr. Carol Milano, MD.  Wow, what an impressive person and ham radio operator she is:  https://www.qsl.net/kp4md/#New%20York

This club is doing a group build of a version of the famed Tuna Tin Two.    I mentioned that I had held the original TTT in my hands, and that Rex Harper had conducted a "Mojo Transfer Ceremony" that imparted TTT Mojo to my BITX17 transceiver (which was also discussed).  I promised to share the video of that momentous event.  Here it is: https://youtu.be/9RZRaFUtTcc

Thanks to Carol and the members of the RCARCS.  This was a lot of fun.  

Sunday, November 6, 2016

SolderSmoke Podcast #191 RIGS! REAL RIGS!, BITX40 Module, EMRFD, MAILBAG


SolderSmoke Podcast #191 is available:

http://soldersmoke.com/soldersmoke191.mp3

TRAVELOGUE AND FAMILY DOINGS:   Pete son's wedding, Billy's Birthday, Gonzalo safely home in the Dominican Republic, MORE BEARS IN THE SHENANDOAH WOODS

BIG NEWS:  EMRFD LIVES ON!   Three cheers for Wes and for Tom Gallagher of the ARRL.

BENCH REPORTS:

PETE:   FPM Rig.  Some Halli history.  A TRUE RIG!  Working Japan. 
             WITH 600 WATT LINEAR AMPLIFIER!!!!!!!!!!!!!!!!!!!!!!
               New FEELTECH  Sig Gen.  

BILL: Farhan's BITX Module
           Built to Mod, built to get you started in homebrew
           Very impressive.  BITX in miniature.  But completely recognizable.
           REMARKABLY stable.
           Farhan personally checking each one.
           Ladies collective doing toroids.  DONATION money bought them some Diwali candies!
           VFO Drift:  Will NP0 SMD caps and lower current help enough?
           My Analog VFO -- BANDSWEEP

QRPppppppppppp  with REX's Hamfest Buddy.   Thanks Rex and Bob Crane.

HB2HB with KW4KD

MAILBAG
Jan's Netherland Mate Mighty Midget
Charlie's Kiwi DSB
Steve, Donald Fagan, and Jean Shepherd
Rob VK5RC repairs Tek Tube 'scopes
Colin M1BUU Si5351 superhet
Denis Klipa and NRL 3538
Jonathan M0JGH Wizard of Wimbledon Matchbox rig
JH8SST Simpleceiver
Peter Parker Vk3YE Reviews Book
Peter GW4ZUA Welsh LBS
Michael Rainey helping hobbyist in Germany with tuning forks.





Thursday, October 13, 2016

Smoke-Free! On the Air with the W1REX Dayton Hamfest Buddy


After the Dayton Hamvention, our ace correspondent Bob Crane (W8SX) sent me the "Hamfest Buddy" kit that Rex Harper W1REX had put together and used in "The World's Biggest Build-a-Thon."

It is a single 2N2222 crystal-controlled oscillator for 20 meters.   All the parts are plug-in -- no solder smoke is released.   Mine went together in about 15 minutes and fired right up.  You can see it above.  It runs off the 9V battery. I had to hold it down with tape.   You can see the key button in the lower right.  That little inductor in the foreground is used to shift the frequency a bit.  I had to remove the 10K resistor in the emitter circuit because with my antenna the circuit was going into low-level oscillation even in key-up.  With the 10K resistor removed, this problem disappeared.

I hooked it up to my 20 meter dipole and called CQ.   With only about 60 milliwatts into a dipole under poor conditions, I really didn't think I'd get any answers.  But I figured the Reverse Beacon Network might pick me up.  It did:


Thanks Bob!  Thanks Rex!


Thursday, June 2, 2016

Manhattan-style Vacuum Tubes: "An Evolution of Thermatron Homebrew Techniques" by Grayson Evans



Grayson Evans was at Dayton.  Scheduling problems prevented him from being interviewed by ace correspondent Bob Crane, but Grayson was kind enough to e-mail us the essence of his presentation.  And it is really wonderful.  He brings the advantages of the Manhattan construction technique (fast prototyping, all components on the same side of the board, easy modification) to the world of tubes (aka valves or, as Grayson prefers, thermatrons).  We also see in Grayson's work an admirable willingness to bridge the digital-analog design, to bring into his rigs the best of the old and the new.  Thanks Grayson!

Grayson writes:

An Evolution of Thermatron Homebrew Techniques

For a long time I have been trying to develop some techniques to prototype Thermatron projects as easily as the typical “Manhattan style” solid-state construction.  Thermatron projects you see now-a-days still use the traditional technique of mangling aluminum-drilling and mounting everything to a “bud” style chassis. This just takes too much time and my projects always look disappointing.

Fortunately, around two years ago, Rex Harper, W1REX, came to the rescue after hearing an earlier talk of mine and developed a set of thermatron socket pads. The MeTubes panel from QRPme consists of 10 prototype pads for thermatron sockets. The panel has v-scores for breaking the panel into single tube pads. The panel has pads for mini 7 & 9s, octal, compactrons and acorns. Awesome.



The best sockets to use with the pads are PCB style.  These provide a large pin area to bend out and solder to the pad (see photos). 


I pre-mount a dozen or so of the 7-pin and 9-pin sockets on MeTube pads so I have them ready to go when prototyping. The “crude” example below shows and 7 and 9-pin socket on one of my prototypes.  I think this was a microphone amp for my AM transmitter.  Pardon the mess.


The nice thing about the pads is that they provide plenty of room to tac solder lots of parts to a single pin–easy to add or remove parts.  This is a lot easier than using the traditional tube socket pin. 

Prototyping thermatrons in this way is FAST.  No more punching out holes to hold thermatron sockets in aluminum chassis!

But it is still nice to be able to have the thermatron on the “top” of the board and the components on the “bottom” of the board.  To do this and still use the MeTube pads, the thermatron has to be mounted on the other side.  I did this by mounting the socket through the MeTube pad.  This requires making a hole in the center of the pad to pass the socket through and then soldering the pins in the usual way.  This is way easier with PC mount thermatron sockets and make a very nice installation. 




This technique has some great advantages over using the traditional socket with pins.  The pad has a lot more room to mount components to each pin.  Normal thermatron socket pins are difficult to attach more than two wires and it’s a bit more difficult to get a good solder connection.  The pads are easy to solder to and allow components to be easily attached in any direction since the “socket” is now flat.



It is also easy to attach the socket/pad to a copper clad board.  The same hole must be made in the copper clad board to pass the top of the socket through, then the pad is superglued to the board in the regular way.  



This is another example of “right side up” thermatron mounting on a prototype test board for crystal filters.  I mounted a small “plug board” (not sure what you call these things) in the center to allow me to easily swap filter components.  Notice the acorn thermatron soldered direct to the pad.  The board works great, the filter design sucked.  I gave up.  Maybe too much distributed C.


I used this technique, combined with Roger Fell’s idea of using inverted aluminum chassis, to build my latest project, a QRP AM/CW transmitter.  I’ve been wanting to try out a few new ideas and this seemed like a good project to try them on.  I also wanted to build the transmitter in modular “blocks”, interconnected in a similar way to Rogers. It worked pretty good although I am still trying to get the thing to work right.  Even new construction techniques can’t cure my screwups.  BTW, the ANALOG VFO is ROCK SOLID.  +/- 10 Hz over 30 min.   Even I was impressed.  The Hartley oscillator is the best circuit for thermatron circuits by far.



I’ll send an update when I get it fully working on AM and CW.
73,

Grayson
TA2ZGE

























Saturday, May 28, 2016

HOMEBREW HERO: REX HARPER W1REX AND THE WORLD'S BIGGEST BUILD-A-THON

Rex, shortly before questioning by authorities
Wow, Rex Harper W1REX deserves some sort of big award.  I hereby grant him the coveted Brass Figlagee with Bronze Oak Leaf Palm, but that is clearly not enough.  Rex spent a month of 20 hour days putting together kits for the Four Days in May QRP event at the Dayton Hamvention.   The results were spectacular:  246 hams succeeded in building QRP transmitters, and they all did it in under 70 minutes.   

Just as impressive as the results were the ways in which Rex overcame the technical and organizational hurdles prior to the event.  You can read all about this in Rex's excellent write up:
http://www.qrpme.com/docs/FDIM%202016%20Report.pdf

The OFFICIAL SolderSmoke Correspondent at Dayton was once again our friend Bob Crane, W8SX.  Bob caught up with Rex and somehow managed to get him to stand still long enough to do this interview:

http://soldersmoke.com/W1REXDaytonInterview.mp3

And it was very nice that Rex did this as a tribute to Dave Ingram K4WTJ whose magazine articles about simple QRP rigs inspired many of us.  Years ago, right after completing a homebrew QRP transceiver, I talked to Dave on 30 meter CW and told him that his articles had helped motivate me to build. 

Finally, no SolderSmoke post about Rex would be complete without a repetition of the video showing him transferring the prodigious mojo of the original Tuna Tin Two into my BITX-17 transceiver.

Friday, July 17, 2015

Colin's Tuna Tin Mighty Mite (Video)




You will remember Colin as the builder of that beautiful BITX20 that he first used from his backyard and later used with great success from a hilltop in Northern England.  In this video we see Colin demonstrating his Michigan Mighty Mite.  Lots of soul in that little machine!   Colin notes that this rig worked well from the start.   The Radio Gods were obviously pleased by his use of a tuna tin as the chassis.  I think they also liked the MePads from W1REX and the Tek 465 'scope.   And of course the T-shirt was obviously a key element in Colin's success.  

Here is that beautiful BITX, now equipped with an internal speaker:



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, November 13, 2014

Colin's BITX


With advice and tribal knowledge from N6QW and MeSquares from W1REX, Colin M1BUU, is making excellent progress on his BITX.  I see that he has some territory on the board reserved for a DDS VFO.  That's fine, but here's and idea for Colin and other builders:  Why not build it with the standard VFO first and then add the DDS or Si570 VFO later, perhaps as an external accessory?   That way you get the experience of building an LC VFO -- the full BITX experience. 

Yea, it is hard to imagine Paul M0XPD as a newcomer to the hobby such a short time ago -- he is definitely now in the ranks of the esteemed digital Elmers.   

And yes Colin, we do hope you avoid unwanted oscillations.  Because of Farhan's great design you have a good shot at avoiding this plague.  But be prepared OM.  It happens to the best of us.  A lot.   Stiff upper lip!  Never give in!  

*************

Hi Bill,
I enjoyed your video about your Arduino experiment. You bet me to it! I'm really looking forward to getting my version of an Arduino powered BITX up and running.
Steady progress is being made, yesterday I added my first bidirectional amplifier to the build. I now have the mic amp, BFO, balanced modulator and first amp completed. I tested the BFO on it's own and got a respectable looking signal out of it and with a good swing below 10MHz.
Next I need to add the crystal filter, second IF amp and mixer. Pete's video will help for the mixer! BTW, I'm using the ver3 schematic but I intend to use the ver1 band pass filter.
I set out building the circuit following the N2CQR layout diagram but I've already run short on space! I do have a good excuse though, my board is smaller than yours (10"x6").
Despite my best intentions, I'm falling back towards old habits of making my circuits physically small. I'm using MeSquares in order to try and force myself to space things out a bit. I do hope that I don't end up with any unwanted coupling!
I must try hard to leave lots of space between the next bits of circuit.
I was listening to SolderSmoke 104 today and Paul M0XPD was introduced as a new ham. Little did we know that Paul would become such a big player!
73, Colin M1BUU

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, November 8, 2014

Pete's "Let's Build Something" Audio Amplifier (video)



Who needs LM386 ICs?  Pete goes discrete!   Love the MePads.   And I knew Pete was going to test it with his finger!  He's just taking stray hum from the power lines and coupling it to the input through that Exacto knife.   

Seems to me like these boards is getting close to actually receiving signals.     

 Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Pete's Mixer (Pictures)


Hi Guys,
 
Just finished building the PD/BM that will be used in the final circuit of the LBS Part I. I will also upload a video of the build.
 
The W1REX MeSquares really work very well and greatly facilitate the build. So the newbie builder -- will have one leg up by using the squares method.
 
73’s
Pete N6QW





Pete's video on this circuit appears below -- just scroll down a few. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, July 12, 2014

Thomas's Magnificent Minima


Wow, Thomas's page makes me really want to build a Minima.  Note the Manhattan style with Rex Harper's Me-Pads.  Excellent.   Thomas provides a really great stage-by-stage description of the project with the kind of candid descriptions of mistakes that SolderSmoke listeners are so fond of!  


http://www.sarfata.org/ham/minima/

Thomas himself has an interesting "international brotherhood"  personal history:

http://www.sarfata.org/about.html



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, May 10, 2014

FDIM Midnight Mojo Ceremony (Tuna Tin 2)


Tyson Tuna Tin Two

An important message From Rex, 
Transcendental Titan of the Tuna Tin Twos:
 --------------------
Fans of the Ancient Sacred Relic,

If you have a little QRP rebel in you, like me, and are a fan of Ancient Sacred Relic, i.e. The Original Tuna Tin 2 transmitter, and all things housed in round metal containers usually designed for fish products and pineapple, and maybe cats if VERY thoroughly cleaned, then you might want to bring your Tuna Tin 2 rig to FDIM!

Around midnight, after the scrum leaves the FDIM Club night gathering, there will be a Tuna Tin 2 Midnight MOJO ceremony! THE one and only ORIGINAL Tuna Tin 2 transmitter will be on hand for this solemn occasion where major QRP MOJO is transferred from the Ancient Sacred Relic into the tuna can inductees in attendance. Admission is free but you MUST bring a MOJOee tuna can housed rig for entrance to the ritual.

NO rectangular or mint tin equipment will be admitted!! NO unaccompanied minors OR adults OR adults who act like minors will be admitted.

TT2 QRP MOJO will be transferred....FUN will be had.....PRIZES will be raffled off!

If you think you might like to be there for the Tuna Tin 2 Midnight MOJO ceremony remember to pack a tuna can or reasonable facimile (307 (3 + 07/16" diameter) industry standard 2 piece or 3 piece can) housed TT2 style rig in your travel bag!!

REMEMBER: NO rectangular or mint tin equipment will be admitted!! You must have a TT2 inspired rig in you personal possession to gain
admittance! NO exceptions!!

Respectfully submitted,
Rex  W1REX  The TUNA Tinman!

--------------------
 
I will not be at Dayton, but I might be able to lend my TT2 (seen above with Tyson) should some worthy radio amateur wish to participate in the midnight ritual.  Time is short, so if you are interested,  send me an e-mail explaining why you are worthy. 
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column