Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
You can see here why I had so much fun in the summer of 2001 with my Azorean Homebrew QRP DSB rig. And why I am now re-CYCLING (get it?) and refurbishing the 17 meter gear that I built last cycle.
I've had the DSB rig on the air yesterday and have worked seven stations (2 watts peak DSB to a dipole).
Back to the Future! Someone on QRP-L said the SFI was recently at 180! Go Sol!
I've been remiss in posting to the blog, but I have a good excuse: I've been melting solder. I have working on the installation of my new Farhan-designed JBOT amplifier in my old Azorean DSB transceiver. I'm really enjoying this project, and I now see it as the first in a series. My shack has a number of creations that were built during the peak years of the last solar cycle, but have since fallen into disuse. Many of them were partially cannibalized -- usually it was the RF amplifier that was taken out. The JBOT was just what I needed. I plan to refurbish all of these rigs, adding a bit of India to each one of them. This is very much in keeping with our "International Brotherhood of Electronic Wizards" ethos.
The installation went fairly well, but with all of the ups and downs that accompany this kind of project. The amp worked fine on the bench, fed with a signal generator and into a dummy load. But of course, life got more complicated when I installed it in the rig. Yes, it took off on me. This was no fault of the amplifier -- I just needed to add some additional shielding. It is working fine now. See above. I moved it out of center stage and put it off in the corner to avoid feedback problems. More discussion of this in the next podcast (maybe this weekend).
One reason for wanting to get Colossus working in 1996 was that for far too long the Americans have got away with the myth that the ENIAC was the first large-scale electronic digital calculator in the world. It was not, but they got away with it because Colossus was kept secret until the 1970s. As 1996 was the 50th anniversary o the switch-on of ENIAC I made sure that Colossus was rebuilt and working in Bletchley Park, just as it was in 1944.
There has been a stunned silence from across the water!
I like that term! "Amateur Engineering" always seemed to sound kind of scary, conjuring up images of bridges that don't quite stay in place. "Recreational Engineering" has a nicer, less ominous ring to it. I found this phrase at the end of this newspaper article on the Maker movement:
Yesterday I was listening (as I do each morning at 0635) to Garrison Keillor's "Writer's Almanac." (I use a beautiful old FM broadcast receiver that Rogier out in California sent me for my birthday.) Garrison announced that it was the birthday of the Arecibo radio telescope (it opened on November 1, 1963). I wanted to post something about this on the blog, but was running a bit late and didn't get to it. This morning I was greeted by an e-mail from Ken, KG6PO, alerting me to a really magnificent video tour of the Arecibo facility. Wow. This is truly amazing. You guys are going to love this one. Three cheers for Bob Zimmerman! As I watched, I got the distinct feeling that we were visiting Bob's shack, and that the dish was his antenna!
Please spread the word about this video -- it is a real shame that it has only received 757 views. Three cheers for the guys who filmed this. Beautiful work.
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
Free e-Book version of The ARRL Antenna Book
-
Many thanks to Alex (KR1ST), on Mastodon, who notes that the e-Book version
of The ARRL Antenna Book 25th Edition is free on the ARRL website. Simply
go t...
International sounds for the umbraphiles
-
Hi I’m FastRadioBurst 23 from the Imaginary Stations crew letting you know
about this week’s shows. The first broadcast is to Europe via Shortwave
Gold on...
March 28, 2024. Just another Day at the Office.
-
FT-8 with a RPi Zero W
Given the FT-8 achievement maybe even QUISK would work on the RPi Zero W
for a really small SDR Transceiver.
But all that g...
The GM3OXX “Oxo” Transmitter
-
As well as the small stash of finished projects that grace my living space,
I also have two small boxes containing various boards. Some of them are
boards ...
Handy breakout board for Raspberry Pi Pico
-
Just picked up a few of these breakout boards. I'm not sure that I like the
screw terminals but it is handy having LEDs on each GPIO pin. I'm really
gettin...
Repairing a dead Kenwood TS-850S
-
Recently, a Kenwood TS-850S - a radio from the mid-early 1990s - crossed my
workbench. While I'm not in the "repair business", I *do* fix my own
radios,...
A 51S-1 Restoration Story
-
I came across my Collins 51S-1 in a big junkyard in Ankara, Turkey around
2012. It was in a pile with a lot of other electronic scrap, probably from
one o...
New QRP Cluster Online From OM0ET and OM6APN
-
By DX EXPLORER
DX EXPLORER
Paul OM0ET and Peter OM6APN recently launched a new cluster dedicated to
QRP operations. Have a look and I hope you will enjoy...
3D Printing The Hadley 114mm Newtonian Telescope
-
Yes, we’re building a 3D Printed Newtonian Telescope called Hadley. It’s
being printed in PETG and in the video below, I give a quick tour. My build
isn’...
3D printed project boxes
-
I have been busy with some other things that have kept me away from
electronics projects for quite a while. Now I can get back to them, but
realize I n...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Adding Enclosure to your sBitx Boards Order
-
The early buyers of the sBitx board set who bought it for $270 USD might
want to also add the enclosure (box) for in the kit. What you will now get
is a f...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasickn...